Parquet and its features

Today, the parquet is very successful among flooring.He will see well and buy it simply, you need to go to the site/catalog/molding/and make your choice, and choose what to choose from. Wood is used as the source material for the parquet. The state of quality of the parquet is dependent not only on which breed is wood, but also on the technology of processing the parquet board.

The texture of the parquet board is determined by the cut of wood, it affects the state of the appearance of the parquet. There are four types of sawing wood. It is rustic, tangential, radial and transverse.

The wood has a saw: (a) – rustic words (b) – tangential sawing (c) – radial.

With a tangential cutting, wood is sawn from a tangent in relation to the annual layer of wood. The wood fibers do not have a single direction, while the parquet board has a unique pattern.

With radial cutting, the wood is sawn in the perpendicular direction relative to the annual layers. The pattern comes out quite homogeneous. But the parquet is distinguished by increased strength.

The cut in the transverse direction is used in order to make an art parquet.

Depending on the technology of sawing wood, Parquet is the following varieties: economy, rustic, standard, radial, tangential.

Stew is considered not a very expensive type of parquet. Parquet without selection by cutting, allows the presence of living and dark knots, cracks in the drying out that do not affect the state of the floor quality, damage to a mechanical nature. From the rear of the dies.

The rustic is the type of parquet in which there is no selection by the cut, with the corresponding of the first category in quality, which absolutely preserves the natural image of wood. Allow the presence of large light and dark knots with a diameter of more than three millimeters of no more than three pieces per part of the riveting from above, cracks that do not reach part of the riveting from above, mechanical damage with a depth of no more than one and a half millimeters.