In the event that the internal partitions of the bath room are made of combustible materials, the following security measures must be carried out. So, the opening of the wall or the area or the area of the wall, in which the opening itself, located behind the stove case, must be sewn with asbestos cardboard and place the metal sheet with a thickness of four millimeters on top. It turns out that the smallest distance from the stove case to walls and partitions, unprotected by metal and asbestos, should be three hundred twenty millimeters. In the event that the walls are protected, the distance can be reduced to two hundred and sixty millimeters. All these works can easily be done with your own hands.
Laying the foundation for the future furnace for the bath
The design of the brick furnace in the bath in itself has a satisfied large weight, because of this, its construction requires an increase in the base. We are talking about building a foundation for the furnace. The angle of the steam room, in the area of which the furnace will be located, must be isolated and strengthened to prevent the effects of large temperature changes and the occurrence of various cracks in the building.
For the construction of the foundation, it is necessary to dig a pit with a total depth of up to 0.7 meters. The bottom is necessary for fifteen centimeters to fill with sand. Next, it is necessary to soak the sand with water and fill it with rubble and broken brick. The next step is to make the formwork in the pit and build a reinforced frame. After that, the entire structure is poured with a layer of concrete so that about fifteen centimeters remain to the surface. After that, the formwork is dismantled and bundron is applied on the sides of several layers. All the remaining space must be filled with large sand.
Laying the foundation for the future furnace for the bath
The last two layers of the foundation must be made from two pieces of roofing material, which should be equal to the area. These layers play the role of waterproofing material. Using such isolation, the foundation of reinforced concrete will be able to maintain its low temperature even in hot summer. After the foundation for a bathhouse is ready, you must again check the horizontal structure. Using the bricks of the intermediate row and the solution can be rid of the resulting inaccuracies. After that, you can start building a brick for a bath with your own hands.